Omron SYSDRIVE 3G3FV User Manual page 252

Advanced Operation
Setting Setting
1F Terminal 13/14 Switch (Selects terminal 14 when ON.)
20 to External Fault
2F (Any combination of the following can be set as needed.)
Input: Normally open or normally closed
Detection mode: Always or During operation only
Stopping method: Decel, Coast, Emergency, or Continue
30 PID Integral Reset (ON: Resets the integral value with I
control disabled.)
31 PID Integral Hold (ON: Retains the integral value.)
60 DC Injection Activate (Performs DC braking when ON.)
61 External search 1 (Speed search from max. frequency)
62 External search 2 (Speed search from frequency reference)
63 Energy-saving operation (according to b8-01 and b8-02)
64 to 66 Not used. (Do not input this setting.)
71 Speed Torque Control Change (Torque Control when ON.)
72 Zero-servo Command (Zero Servo operation when ON.)
77 ASR Gain Switch
ON: Use proportional gain in C5-03.
OFF: Calculate gain from C5-01, C5-03, and C5-07.
Parameter Settings
The following table shows the setting information for multi-function inputs 1 through 6. These parame-
ters cannot be changed during operation.
Parameter Display name p y
number
H1-01 Terminal 3 Sel
H1-02 Terminal 4 Sel
H1-03 Terminal 5 Sel
H1-04 Terminal 6 Sel
H1-05 Terminal 7 Sel
H1-06 Terminal 8 Sel
Note 1. The default settings in parentheses are the default settings when the Unit is initialized for
3-wire control.
Note 2. The following table shows the settings and page references for some common functions.
6-78
Function Function
Setting g Units Default
range setting
0 to 77 --- 24
0 to 77 --- 14
0 to 77 --- 3 (0)
0 to 77 --- 4 (3)
0 to 77 --- 6 (4)
0 to 77 --- 8 (6)
V/f V/f
w/PG
OK OK
OK OK
OK OK
OK OK
OK OK
OK ---
OK ---
OK OK
--- ---
--- ---
--- ---
--- ---
Valid access levels
*1 *1
V/f V/f with
Control PG
Basic or Advanced
Basic or Advanced
Basic or Advanced
Basic or Advanced
Basic or Advanced
Basic or Advanced
Chapter 6
Control mode
Open-loop Flux
Vector Vector
OK OK
OK OK
OK OK
OK OK
OK OK
OK ---
OK ---
--- ---
--- ---
--- OK
--- OK
--- OK
Open Loop Flux
Vector Vector