Table of Contents
Advertisement
Preparing for Operation
Parameter
Display name
p y
number
A1-04
Enter Password
Parameter
Display name
p y
number
A1-05
Select Password
Password Setting Example
The following example shows how to set the password to "1000."
Key sequence
4 times
+
S User Parameters
Parameters A2-01 through A2-32 specify the parameters that can be displayed and changed when the
access level parameter (A1-01) is set to 1. Parameters A2-01 through A2-32 can be changed only in the
Advanced access level and cannot be changed during operation.
Parameter
Display name
p y
numbers
A2-01 to
User parameter 1 to
A2-32
User parameter 32
3-22
Setting
g
Units
Default
range
setting
0000 to
---
0
9999
Setting
g
Units
Default
range
setting
0000 to
---
0
9999
Display
Displays operation mode.
Displays initialize mode.
Puts the Unit in initialize mode.
(Select Language display)
Displays the Enter Password display.
Press and hold the Reset Key and then press the
Menu Key to display A1-05.
Selects the parameter so that the leading 0 flashes.
(The digit that can be changed flashes.)
Changes the password to 1000.
Writes the new setting.
Returns to the Select Password display (A1-05).
Returns to the Enter Password display (A1-04).
Setting
g
Units
Default
range
setting
b1-01 to
---
---
o2-08
Valid access levels
V/f
V/f
Open Loop
Control
with PG
Quick-start, Basic, or Advanced
Valid access levels
V/f
V/f
Open Loop
Control
with PG
Quick-start, Basic, or Advanced
Explanation
Valid access levels
V/f
V/f
Open Loop
Control
with PG
Advanced
Chapter 3
Flux
Vector
Vector
Flux
Vector
Vector
Flux
Vector
Vector
- Quick Links:
- Fault Detection
Hide quick links:
Advertisement
Table of Contents
