Chapter 4 Tutorials
Go to the Status screen to check your WAN connection status. Make sure the
8
status is not down.
Figure 27 Tutorial Example: Status
4.3.3 Public IP Address Mapping
To have the local computers and servers use specific WAN IP addresses, you need
to map static public IP addresses to them.
Note: The one-to-one NAT address mapping rules are for both incoming and outgoing
connections. The ZyXEL Device forwards traffic that is initiated from either the
LAN or the WAN to the destination IP address.
Note: The many-to-one or many-to-many NAT address mapping rules are for
outgoing connections only. That means only traffic initiated from the LAN or
returned packets are allowed to go through the ZyXEL Device.
In this example, you create two one-to-one rules to map the internal web server
(192.168.1.12) and mail server (192.168.1.13) to different static public IP
addresses. The many-to-one rule maps a public IP address (1.2.3.4, that is, the
ZyXEL Device's WAN IP address) to outgoing LAN traffic. It allows other local
58
P-2612HW-F1 User's Guide