Wpa(2)-Psk - ZyXEL Communications P-2612HW-F1 User Manual

802.11g wireless adsl voip iad

Hide thumbs Also See for P-2612HW-F1:

Table of Contents

Chapter 8 Wireless LAN

8.2.3 WPA(2)-PSK

In order to configure and enable WPA(2)-PSK authentication; click Network >

Wireless LAN to display the AP screen. Select WPA-PSK or WPA2-PSK from

the Security Mode list.

Figure 81 Network > Wireless LAN > AP: WPA(2)-PSK

The following table describes the wireless LAN security labels in this screen.

Table 27 Network > Wireless LAN > AP: WPA(2)-PSK

Security Mode

WPA Compatible

Pre-Shared Key

Choose WPA-PSK or WPA2-PSK from the drop-down list box.

This field is only available for WPA2-PSK. Select this if you want the

ZyXEL Device to support WPA-PSK and WPA2-PSK simultaneously.

The encryption mechanisms used for WPA(2) and WPA(2)-PSK are

the same. The only difference between the two is that WPA(2)-PSK

uses a simple common password, instead of user-specific credentials.

Type a pre-shared key from 8 to 63 case-sensitive ASCII characters

(including spaces and symbols).

P-2612HW-F1 User's Guide