The Telnet Screen - ZyXEL Communications P-2612HW-F1 User Manual

Chapter 20 Remote Management
Table 114 Advanced > Remote Management > WWW
LABEL
Secured Client
IP
Apply
Cancel

20.3 The Telnet Screen

You can use Telnet to access the ZyXEL Device's command line interface. Specify
which interfaces allow Telnet access and from which IP address the access can
come. Click Advanced > Remote MGMT > Telnet tab to display the screen as
shown.
Figure 198 Advanced > Remote Management > Telnet
The following table describes the labels in this screen.
Table 115 Advanced > Remote Management > Telnet
LABEL
Port
Access Status
362
DESCRIPTION
A secured client is a "trusted" computer that is allowed to communicate
with the ZyXEL Device using this service.
Select All to allow any computer to access the ZyXEL Device using this
service.
Choose Selected to just allow the computer with the IP address that
you specify to access the ZyXEL Device using this service.
Click Apply to save your settings back to the ZyXEL Device.
Click Cancel to begin configuring this screen afresh.
DESCRIPTION
You may change the server port number for a service if needed, however
you must use the same port number in order to use that service for
remote management.
Select the interface(s) through which a computer may access the ZyXEL
Device using this service.
P-2612HW-F1 User's Guide