ZyXEL Communications P-2612HW-F1 User Manual page 391

Table 123 Maintenance > System > Time Setting (continued)
LABEL
New Time
(hh:mm:ss)
New Date
(yyyy/mm/dd)
Get from Time
Server
Time Protocol
Time Server
Address
Time Zone
Setup
Time Zone
Daylight
Savings
P-2612HW-F1 User's Guide
DESCRIPTION
This field displays the last updated time from the time server or the last
time configured manually.
When you set Time and Date Setup to Manual, enter the new time in
this field and then click Apply.
This field displays the last updated date from the time server or the last
date configured manually.
When you set Time and Date Setup to Manual, enter the new date in
this field and then click Apply.
Select this radio button to have the ZyXEL Device get the time and date
from the time server you specified below.
Select the time service protocol that your time server sends when you
turn on the ZyXEL Device. Not all time servers support all protocols, so
you may have to check with your ISP/network administrator or use trial
and error to find a protocol that works.
The main difference between them is the format.
Daytime (RFC 867) format is day/month/year/time zone of the
server.
Time (RFC 868) format displays a 4-byte integer giving the total
number of seconds since 1970/1/1 at 0:0:0.
The default, NTP (RFC 1305), is similar to Time (RFC 868).
Enter the IP address or URL (up to 20 extended ASCII characters in
length) of your time server. Check with your ISP/network administrator
if you are unsure of this information.
Choose the time zone of your location. This will set the time difference
between your time zone and Greenwich Mean Time (GMT).
Daylight saving is a period from late spring to early fall when many
countries set their clocks ahead of normal local time by one hour to
give more daytime light in the evening.
Select this option if you use Daylight Saving Time.
Chapter 22 System
391