Tutorial; Chapter 4 Tutorial; Overview; How To Set Up A Wireless Network - ZyXEL Communications P-2612HW-F1 User Manual

C
H A P T E R

4.1 Overview

This chapter includes the following tutorials:
• How to Set up a Wireless Network on page 45
• Using NAT with Multiple Public IP Addresses on page 54
• Using NAT with Multiple Game Players on page 71
• How to Make a VoIP Call on page 72
• Using Multiple Interfaces for Ethernet Wan on page 74

4.2 How to Set up a Wireless Network

This section gives you examples of how to set up an access point and wireless
client for wireless communication using the following parameters. The wireless
clients can access the Internet through the ZyXEL Device wirelessly.

4.2.1 Example Parameters

SSID
Security
802.11 mode
An access point (AP) or wireless router is referred to as the "AP" and a computer
with a wireless network card or USB adapter is referred to as the "wireless client"
here.
The M-302 utility screens are used here as an example. The screens may vary
slightly for different models.
P-2612HW-F1 User's Guide
SSID_Example3
WPA-PSK
(Pre-Shared Key: ThisismyWPA-PSKpre-sharedkey)
Mixed (IEEE 802.11b/g)
4
Tutorials
45