ZyXEL Communications P-2612HW-F1 User Manual page 220

Chapter 10 Voice
Table 62 European Flash Key Commands
COMMAND
Flash
Flash
European Call Hold
Call hold allows you to put a call (A) on hold by pressing the flash key.
If you have another call, press the flash key and then "2" to switch back and forth
between caller A and B by putting either one on hold.
Press the flash key and then "0" to disconnect the call presently on hold and keep
the current call on line.
Press the flash key and then "1" to disconnect the current call and resume the call
on hold.
If you hang up the phone but a caller is still on hold, there will be a remind ring.
European Call Waiting
This allows you to place a call on hold while you answer another incoming call on
the same telephone (directory) number.
If there is a second call to a telephone number, you will hear a call waiting tone.
Take one of the following actions.
• Reject the second call.
Press the flash key and then press "0".
• Disconnect the first call and answer the second call.
Either press the flash key and press "1", or just hang up the phone and then
answer the phone after it rings.
• Put the first call on hold and answer the second call.
Press the flash key and then "2".
European Call Transfer
Do the following to transfer an incoming call (that you have answered) to another
phone.
Press the flash key to put the caller on hold.
1
When you hear the dial tone, dial "*98#" followed by the number to which you
2
want to transfer the call. to operate the Intercom.
220
SUB-
DESCRIPTION
COMMAND
3 Create three-way conference connection.
*98# Transfer the call to another phone.
P-2612HW-F1 User's Guide