ZyXEL Communications P-2612HW-F1 User Manual page 80

Chapter 4 Tutorials
Click an Edit icon to open the Group Setup screen. This is where you can
2
configure the 802.1Q/P settings for Connection 1.
• Assign the connection a Name, such as 'connect1' for easy reference.
• Enter that connection's VLAN ID, which you previously configured as '10' in
Section 4.6.1 on page
• Set the Default Gateway to PVC1.
• Set LAN1 and SSID1 to Fixed.
• And finally, enable TX Tagging for SSID1.
After you are finished, click Apply to save your settings.
80
76.
P-2612HW-F1 User's Guide