ZyXEL Communications P-2612HW-F1 User Manual page 101

Table 12 Network > WAN > Internet Access Setup (continued)
LABEL
Subnet Mask
Gateway IP
address
DNS Server
First, Second,
and Third DNS
Server
Connection
Nailed-Up
Connection
Connect on
Demand
Max Idle
Timeout
Apply
Cancel
Advanced Setup
P-2612HW-F1 User's Guide
DESCRIPTION
(ENET ENCAP encapsulation only.)
Enter a subnet mask in dotted decimal notation when you select
DHCP in the Encapsulation field.
(ENET ENCAP encapsulation only.)
You must specify a gateway IP address (supplied by your ISP) when
you select DHCP in the Encapsulation field.
Select Obtained From ISP if your ISP dynamically assigns DNS
server information (and the ZyXEL Device's WAN IP address) and you
select Obtain an IP Address Automatically.
Select UserDefined if you have the IP address of a DNS server. Enter
the DNS server's IP address in the field to the right. If you chose
UserDefined, but leave the IP address set to 0.0.0.0, UserDefined
changes to None after you click Apply. If you set a second choice to
User-Defined, and enter the same IP address, the second
UserDefined changes to None after you click Apply.
Select None if you do not want to configure DNS servers. You must
have another DNS server on your LAN, or else the computers must
have their DNS server addresses manually configured. If you do not
configure a DNS server, you must know the IP address of a computer
in order to access it.
(PPPoE encapsulation only.)
(PPPoE encapsulation only.)
Select this option when you want your connection up all the time. The
ZyXEL Device will try to bring up the connection automatically if it is
disconnected.
(PPPoE encapsulation only.)
Select this option when you don't want the connection up all the time
and specify an idle time-out in the Max Idle Timeout field.
(PPPoE encapsulation only.)
Specify an idle time-out in this field when you use the Connect on
Demand option. The default setting is 0, which means the Internet
session will not timeout.
Click Apply to save the changes.
Click Cancel to begin configuring this screen afresh.
Click this button to display the Advanced Internet Access Setup
screen and edit more details of your WAN setup.
Chapter 6 WAN Setup
101