Wds Screen - ZyXEL Communications P-2612HW-F1 User Manual

Chapter 8 Wireless LAN
The following table describes the labels in this screen.
Table 34 Network > Wireless LAN > WPS Station
LABEL
Push Button
Or input
station's PIN
number

8.7 WDS Screen

Use this screen to set up your WDS (Wireless Distribution System) links between
the ZyXEL Device and other wireless APs. You need to know the MAC address of
the peer device. Once the security settings of peer sides match one another, the
connection between devices is made.
Note: WDS security is independent of the security settings between the ZyXEL
Device and any wireless clients.
At the time of writing, WDS is compatible with some ZyXEL Devices only. Not all
models support WDS links. Check your other ZyXEL Device's documentation.
156
DESCRIPTION
Click this button to add another WPS-enabled wireless device (within
wireless range of the ZyXEL Device) to your wireless network. This
button may either be a physical button on the outside of device, or a
menu button similar to the Push Button on this screen.
Note: You must press the other wireless device's WPS button within
two minutes of pressing this button.
Enter the PIN of the device that you are setting up a WPS connection
with and click Start to authenticate and add the wireless device to your
wireless network.
You can find the PIN either on the outside of the device, or by checking
the device's settings.
Note: You must also activate WPS on that device within two
minutes to have it present its PIN to the ZyXEL Device.
P-2612HW-F1 User's Guide