Mac Filter - ZyXEL Communications P-2612HW-F1 User Manual

8.4 MAC Filter

Use this screen to change your ZyXEL Device's MAC filter settings. Click Network
> Wireless LAN > MAC Filter. The screen appears as shown.
Figure 86 Network > Wireless LAN > MAC Filter
The following table describes the labels in this screen.
Table 32 Network > Wireless LAN > MAC Filter
LABEL
Active MAC
Filter
Filter Action
Set
P-2612HW-F1 User's Guide
DESCRIPTION
Select the check box to enable MAC address filtering.
Define the filter action for the list of MAC addresses in the MAC Address
table.
Select Deny to block access to the ZyXEL Device, MAC addresses not listed
will be allowed to access the ZyXEL Device
Select Allow to permit access to the ZyXEL Device, MAC addresses not
listed will be denied access to the ZyXEL Device.
This is the index number of the MAC address.
Chapter 8 Wireless LAN
153