Table 105 Advanced > 802.1Q/1P > Group Setting > Edit (continued)
LABEL
Default
Gateway
Ports
Control
Tx Tag
Back
Apply
Cancel
17.3 The 802.1Q/1P Port Setting Screen
Use this screen to configure the PVID and assign traffic priority for each port. Click
Advanced > 802.1Q/1P > Port Setting to display the following screen.
Figure 185 Advanced > 802.1Q/1P > Port Setting
P-2612HW-F1 User's Guide
DESCRIPTION
Select the default gateway for the VLAN group.
This field displays the types of ports available to join the VLAN group.
Select Fixed for the port to be a permanent member of the VLAN group.
Select Forbidden if you want to prohibit the port from joining the VLAN
group.
Select Tx Tagging if you want the port to tag all outgoing traffic
transmitted through this VLAN. You select this if you want to create
VLANs across different devices and not just the ZyXEL Device.
Click this to return to the previous screen without saving.
Click this to save your changes.
Click this to restore your previously saved settings.
Chapter 17 802.1Q/1P
337