ZyXEL Communications P-2612HW-F1 User Manual page 233

Click Security > Firewall > Rules.
1
Select WAN to LAN in the Packet Direction field.
2
Figure 123 Firewall Example: Rules
In the Rules screen, select the index number after that you want to add the rule.
3
For example, if you select "6", your new rule becomes number 7 and the previous
rule 7 (if there is one) becomes rule 8.
Click Add to display the firewall rule configuration screen.
4
In the Edit Rule screen, click the Edit Customized Services link to open the
5
Customized Service screen.
Click an index number to display the Customized Services Config screen and
6
configure the screen as follows and click Apply.
Figure 124 Edit Custom Port Example
Select Any in the Destination Address List box and then click Delete.
7
P-2612HW-F1 User's Guide
Chapter 12 Firewall
233