ZyXEL Communications P-2612HW-F1 User Manual page 36

Chapter 2 The Web Configurator
Table 3 Navigation Panel Summary
LINK
Firewall
Content Filter Keyword
VPN
Certificates
Advanced
Static Route
802.1Q/1P
QoS
Dynamic DNS
36
TAB FUNCTION
General Use this screen to activate/deactivate the firewall and
the default action to take on network traffic going in
specific directions.
Rules This screen shows a summary of the firewall rules,
and allows you to edit/add a firewall rule.
Threshold Use this screen to configure the thresholds for
determining when to drop sessions that do not
become fully established.
Use this screen to block access to web sites
containing certain keywords in the URL.
Schedule Use this screen to set the days and times for your
device to perform content filtering.
Trusted Use this screen to exclude a range of users on the
LAN from content filtering.
Setup Use this screen to configure each VPN tunnel.
Monitor Use this screen to look at the current status of each
VPN tunnel.
VPN Global Use this screen to allow NetBIOS traffic through VPN
Setting tunnels.
My Certificates Use this screen to generate and export self-signed
certificates or certification requests and import the
ZyXEL Device's CA-signed certificates.
Trusted CAs Use this screen to save CA certificates to the ZyXEL
Device.
Trusted Use this screen to import self-signed certificates.
Remote Hosts
Directory Use this screen to configure a list of addresses of
Servers directory servers (that contain lists of valid and
revoked certificates).
Static Route Use this screen to configure IP static routes to tell
your device about networks beyond the directly
connected remote nodes.
Group Setting Use this screen to activate 802.1Q/1P, specify the
management VLAN group, display the VLAN groups and
configure the settings for each VLAN group.
Port Setting Use this screen to configure the PVID and assign traffic
priority for each port.
General Use this screen to enable QoS and traffic prioritizing,
and configure bandwidth management on the WAN.
Class Setup Use this screen to define a classifier.
Monitor Use this screen to view each queue's statistics.
This screen allows you to use a static hostname alias
for a dynamic IP address.
P-2612HW-F1 User's Guide