ZyXEL Communications P-2612HW-F1 User Manual page 81

Next, click another Edit icon to open the Group Setting screen again to configure
3
Connection 2.
• Assign the connection a Name, such as 'connect2'.
• Enter that connection's VLAN ID, which you previously configured as '20' in
Section 4.6.1 on page
• Set the Default Gateway to PVC2.
• Set LAN2 to Fixed.
• Set both SIP1 and SIP2 to Fixed.
• Set PVC2 to Fixed and enable TX Tagging for it.
After you are finished, click Apply to save your settings.
P-2612HW-F1 User's Guide
76.
Chapter 4 Tutorials
81