Configuring 802.1Q/P - ZyXEL Communications P-2612HW-F1 User Manual

Click Apply to save your changes
8
After configuring the first connection and adding the two others, the More
9
Connections screen shoud be similar to this:

4.6.2 Configuring 802.1Q/P

Now that you have created the connections you will use for your VLANs, you next
to need to configure the ZyXEL Device for actually tagging them using 802.1Q.
IEEE 802.1Q allows large LANs to be divided into any number of smaller "virtual
LANs". As mentioned at the beginning of this tutorial, doing this allows you to filter
data packets based on virtual LAN ID also known as VLAN ID or VID. This portion
of the tutorial shows you how to assign VIDs to the different connections you
created in the previous section and then turn them into virtual LANs.
Open the Advanced > 802.1Q/1P screen.
1
P-2612HW-F1 User's Guide
Chapter 4 Tutorials
79