ZyXEL Communications P-2612HW-F1 User Manual page 77

On the Network > WAN > More Connections screen, click an Edit icon to
3
create a second connection.
Configure Connection 2 similar to Connection 1 from Step 1.
4
• Select Active.
• Enter a Name for the connection, in this case 'connection2'.
• Set the Mode to 'Routing'
• Set the Encapsulation to 'ENET ENCAP'.
• Assign a VLAN ID of '20'.
• Enable VLAN Tagging.
• The other settings on this screen should be provided by your ISP.
P-2612HW-F1 User's Guide
Chapter 4 Tutorials
77