The Upnp Screen - ZyXEL Communications P-2612HW-F1 User Manual

21.2 The UPnP Screen

Click Advanced > UPnP to display the screen shown next. See
page 371 for more information.
Figure 204 Advanced > UPnP > General
The following table describes the fields in this screen.
Table 121 Advanced > UPnP > General
LABEL
Active the Universal Plug
and Play (UPnP) Feature
Allow users to make
configuration changes
through UPnP
Apply
Cancel
P-2612HW-F1 User's Guide
DESCRIPTION
Select this check box to activate UPnP. Be aware that anyone
could use a UPnP application to open the web configurator's
login screen without entering the ZyXEL Device's IP address
(although you must still enter the password to access the web
configurator).
Select this check box to allow UPnP-enabled applications to
automatically configure the ZyXEL Device so that they can
communicate through the ZyXEL Device, for example by using
NAT traversal, UPnP applications automatically reserve a NAT
forwarding port in order to communicate with another UPnP
enabled device; this eliminates the need to manually configure
port forwarding for the UPnP enabled application.
Click Apply to save the setting to the ZyXEL Device.
Click Cancel to return to the previously saved settings.
Chapter 21 UPnP
Section 21.1 on
373