Q/1P Example - ZyXEL Communications P-2612HW-F1 User Manual

17.1.3 802.1Q/1P Example

This example shows how to configure the 802.1Q/1P settings on the ZyXEL
Device.
Figure 178 802.1Q/1P Example
LAN1 and LAN2 are connected to ATAs (Analog Telephone Adapters) and used for
VoIP traffic. You want to set a high priority for this type of traffic, so you will group
these ports into one VLAN (VLAN2) and then set them to use a PVC (PVC1) with a
high priority service level. You would start with the following steps.
Click Advanced > 802.1Q/1P > Group Setting > Edit to display the following
1
screen.
In the Name field type VoIP to identify the group.
2
In the VLAN ID field type in 2 to identify the VLAN group.
3
Select PVC1 from the Default Gateway drop-down list box.
4
In the Control field, select Fixed for LAN1, LAN2 and PVC1 to be permanent
5
members of the VLAN group.
P-2612HW-F1 User's Guide
ZyXEL Device
1
1
2
2
3
4
3
5
6
4
7
8
Chapter 17 802.1Q/1P
VoIP Network
Internet - (PPPoE)
Internet - (PPPoE)
329