ZyXEL Communications P-2612HW-F1 User Manual page 111

Table 17 Network > WAN > More Connections: Edit (continued)
LABEL
Connection
Nailed-Up Connection
Connect on Demand
Max Idle Timeout
NAT
Back
Apply
Cancel
Advanced Setup
P-2612HW-F1 User's Guide
DESCRIPTION
Select Nailed-Up Connection when you want your connection
up all the time. The ZyXEL Device will try to bring up the
connection automatically if it is disconnected.
Select Connect on Demand when you don't want the connection
up all the time and specify an idle time-out in the Max Idle
Timeout field.
Specify an idle time-out in the Max Idle Timeout field when you
select Connect on Demand. The default setting is 0, which
means the Internet session will not timeout.
SUA only is available only when you select Routing in the Mode
field.
Select SUA Only if you have one public IP address and want to
use NAT. Click Edit to go to the Port Forwarding screen to edit
a server mapping set.
Otherwise, select None to disable NAT.
Click Back to return to the previous screen.
Click Apply to save the changes.
Click Cancel to begin configuring this screen afresh.
Click this button to display the More Connections Advanced
Setup screen and edit more details of your WAN setup.
Chapter 6 WAN Setup
111