ZyXEL Communications P-2612HW-F1 User Manual page 56

Chapter 4 Tutorials
Click Network > WAN.
1
Make sure the DSL/WAN switch (on the back of the ZyXEL Device) is pushed to
2
the DSL side and the WAN mode is ADSL WAN.
Select Routing in the Mode field and select PPPoE from the Encapsulation
3
drop-down list box.
Enter the information (such as the user name, password and VPI/VCI value)
4
provided by your ISP. If your ISP didn't give you the service name, leave the field
blank.
In the IP Address section, select Static IP Address and enter the first fixed
5
public IP address ("1.2.3.4" in this example).
Configure the IP address of the DNS server the ZyXEL Device can query to resolve
6
domain names. Select UserDefined and enter the first and second DNS server's
IP addresses given by your ISP.
56
P-2612HW-F1 User's Guide