Configuring The Wan Connection With A Static Ip Address - ZyXEL Communications P-2612HW-F1 User Manual

Configure the WAN connection to use the first public IP address (1.2.3.4).
1
Configure NAT address mapping for other public IP addresses (1.2.3.5 and
2
1.2.3.6).
Configure NAT port forwarding to forward FTP traffic from the WAN to a specific
3
computer on your local network.
4.3.2 Configuring the WAN Connection with a Static IP
Address
The following table shows the information your ISP gave you for Internet
connection.
Encapsulation
VPI/VCI
Public IP Addresses
Gateway IP Address
Subnet Mask
User Name
Password
DNS Server
Follow the steps below to configure your ZyXEL Device for Internet access using
PPPoE in this example.
Figure 25 Tutorial Example: WAN Connection with a Static Public IP Address
LAN
P-2612HW-F1 User's Guide
PPPoE
8/33
1.2.3.4
1.2.3.5
1.2.3.6
1.2.3.7
1.2.3.89
255.255.255.0
exampleuser
abcd1234
1.2.1.1
1.2.1.2
192.168.1.1
1.2.3.4
Chapter 4 Tutorials
WAN
Internet
55