ZyXEL Communications P-2612HW-F1 User Manual page 389

Table 122 Maintenance > System > General
LABEL
Administrator
Inactivity
Timer
Password
Old Password
New Password
Retype to
Confirm
Apply
Cancel
P-2612HW-F1 User's Guide
DESCRIPTION
Type how many minutes a management session (either via the web
configurator or telnet) can be left idle before the session times out. The
default is 5 minutes. After it times out you have to log in with your
password again. Very long idle timeouts may have security risks. A value
of "0" means a management session never times out, no matter how
long it has been left idle (not recommended).
Type the default password or the existing password you use to access the
system in this field.
Type your new system password (up to 30 characters). Note that as you
type a password, the screen displays a (*) for each character you type.
After you change the password, use the new password to access the
ZyXEL Device.
Type the new password again for confirmation.
Click Apply to save your changes back to the ZyXEL Device.
Click Cancel to begin configuring this screen afresh.
Chapter 22 System
389