ZyXEL Communications P-2612HW-F1 User Manual page 102

Chapter 6 WAN Setup
6.2.1.1 Advanced Internet Access Setup (DSL Mode)
Use this screen to edit your ZyXEL Device's advanced DSL mode settings. Click
the Advanced Setup button in the Internet Access Setup screen to display.
Figure 60 Internet Access Setup: Advanced Setup (DSL Mode)
The following table describes the labels in this screen.
Table 13 Internet Access Setup: Advanced Setup (DSL Mode)
LABEL
RIP & Multicast
Setup
RIP Direction
RIP Version
102
DESCRIPTION
This section is not available when you configure the ZyXEL Device to be
in bridge mode.
RIP (Routing Information Protocol) allows a router to exchange routing
information with other routers. Use this field to control how much
routing information the ZyXEL Device sends and receives on the subnet.
Select the RIP direction from None, Both, In Only and Out Only.
This field is not configurable if you select None in the RIP Direction
field.
Select the RIP version from RIP-1, RIP-2B and RIP-2M.
P-2612HW-F1 User's Guide