Static Route; Chapter 16 Static Route; Overview; What You Can Do In The Static Route Screens - ZyXEL Communications P-2612HW-F1 User Manual

C
H A P T E R

16.1 Overview

The ZyXEL Device usually uses the default gateway to route outbound traffic from
computers on the LAN to the Internet. To have the ZyXEL Device send data to
devices not reachable through the default gateway, use static routes.
For example, the next figure shows a computer (A) connected to the ZyXEL
Device's LAN interface. The ZyXEL Device routes most traffic from A to the
Internet through the ZyXEL Device's default gateway (R1). You create one static
route to connect to services offered by your ISP behind router R2. You create
another static route to communicate with a separate network behind a router R3
connected to the LAN.
Figure 174 Example of Static Routing Topology
A
R3

16.1.1 What You Can Do in the Static Route Screens

Use the Static Route screens
IP static routes on the ZyXEL Device.
P-2612HW-F1 User's Guide
LAN
WAN
(Section 16.2 on page
16

Static Route

R1
Internet
R2
324) to view and configure
323