If the upload was not successful, the following screen will appear. Click Return to
go back to the Configuration screen.
Figure 237 Configuration Upload Error
25.3.1 Reset to Factory Defaults
Click the Reset button to clear all user-entered configuration information and
return the ZyXEL Device to its factory defaults. The following warning screen
appears.
Figure 238 Reset Warning Message
Figure 239 Reset In Process Message
You can also press the RESET button on the rear panel to reset the factory
defaults of your ZyXEL Device. Refer to
information on the RESET button.
P-2612HW-F1 User's Guide
Section 1.5 on page 30
Chapter 25 Tools
for more
427