ZyXEL Communications P-2612HW-F1 User Manual page 108

Chapter 6 WAN Setup
access, you are configuring the first WAN connection. This screen is not available
if you set the WAN type to Ethernet in the Internet Access Setup screen.
Figure 63 Network > WAN > More Connections
The following table describes the labels in this screen.
Table 16 Network > WAN > More Connections
LABEL
#
Active
Name
VPI/VCI
Encapsulation
Modify
Apply
Cancel
108
DESCRIPTION
This is an index number indicating the number of the corresponding
connection.
This field indicates whether the connection is active or not.
Clear the check box to disable the connection. Select the check box to
enable it.
This is the name you gave to the Internet connection.
This field displays the Virtual Path Identifier (VPI) and Virtual Channel
Identifier (VCI) numbers configured for this WAN connection.
This field indicates the encapsulation method of the Internet connection.
The first (ISP) connection is read-only in this screen. Use the WAN >
Internet Access Setup screen to edit it.
Click the Edit icon to edit the Internet connection settings. Click this icon
on an empty configuration to add a new Internet access setup.
Click the Remove icon to delete the Internet access setup from your
connection list.
Click Apply to save the changes.
Click Cancel to begin configuring this screen afresh.
P-2612HW-F1 User's Guide