Firmware Specifications - ZyXEL Communications P-2612HW-F1 User Manual

Chapter 28 Product Specifications

Firmware Specifications

Table 160 Firmware Specifications
Default IP Address
Default Subnet Mask
Default User Name
DHCP Server IP Pool
Static DHCP
Addresses
Content Filtering
Static Routes
Device Management
Wireless
Functionality
(wireless devices
only)
Firmware Upgrade
Configuration Backup
& Restoration
Network Address
Translation (NAT)
Port Forwarding
IEEE 802.1Q and
IEEE 802.1P
DHCP (Dynamic Host
Configuration
Protocol)
Dynamic DNS
Support
448
192.168.1.1
255.255.255.0 (24 bits)
admin
Starting Address: 192.168.1.33
Size: 32
10
Web page blocking by URL keyword.
16
Use the web configurator to easily configure the rich range of
features on the ZyXEL Device.
Allow the IEEE 802.11b and/or IEEE 802.11g wireless clients to
connect to the ZyXEL Device wirelessly. Enable wireless security
(WEP, WPA(2), WPA(2)-PSK) and/or MAC filtering to protect your
wireless network.
Download new firmware (when available) from the ZyXEL web site
and use the web configurator, an FTP or a TFTP tool to put it on
the ZyXEL Device.
Note: Only upload firmware for your specific model!
Make a copy of the ZyXEL Device's configuration. You can put it
back on the ZyXEL Device later if you decide to revert back to an
earlier configuration.
Each computer on your network must have its own unique IP
address. Use NAT to convert your public IP address(es) to multiple
private IP addresses for the computers on your network.
If you have a server (mail or web server for example) on your
network, you can use this feature to let people access it from the
Internet.
Use IEEE 802.1Q VLAN and IEEE 802.1P priority tags in
implementing QoS. Configure VLANs based on port, PVC, and
SSID. Specify a PVID to assign to untagged frames or priority-
tagged frames received on this port, SSID, or PVC. Assign a
priority for the traffic transmitted through a port, SSID, or PVC.
Use this feature to have the ZyXEL Device assign IP addresses, an
IP default gateway and DNS servers to computers on your
network. Your device can also act as a surrogate DHCP server
(DHCP Relay) where it relays IP address assignment from the
actual real DHCP server to the clients.
With Dynamic DNS (Domain Name System) support, you can use
a fixed URL, www.zyxel.com for example, with a dynamic IP
address. You must register for this service with a Dynamic DNS
service provider.
P-2612HW-F1 User's Guide