This chapter describes how to access the Prestige and provides an overview of its commands.
2.1
Command Line Overview
You can use line commands to configure the Prestige. If you have problems with your Prestige, customer
support may request that you issue some of these commands to assist them in troubleshooting.
2.1.1 Command Syntax Conventions
1. Command keywords are in courier new font.
2. The / symbol means "or".
3. Type "help" or "?" to display a list of valid commands or type a command (see Table 2-1 Command
Summary) to display a list of associated subcommands.
Copyright (c) 1994 - 2004 ZyXEL Communications Corp.
ras> ?
Valid commands are:
sys
ip
ras>
ras> sys
countrycode
hostname
version
atsh
ras>
2.1.2 Command Notation
The following notations denote user options:
[a/b/c/d...] or <a/b/c/d...>:
[DEFAULT] or <DEFAULT>:
a.b.c.d:
Commands Introduction
Commands Introduction
exit
ether
bridge
lan
Figure 2-1 CLI Help Example –1
date
edit
stdio
datetime
view
wdog
password
socket
Figure 2-2 CLI Help Example -2
Select and type the predefined default options.
Enter the value or predefined selection for this sub-command.
The option is a 4-byte dotted decimal value.
Prestige 650M-6x User's Guide
Chapter 2
wan
feature
time
romreset
cpu
2-1