Set Ssh; Set Ssh Hostkey - Enterasys D2 D2G124-12P Cli Reference Manual

Parameters
None.
Defaults
None.
Mode
Switch command, read‐only.
Example
This example shows how to display SSH status on the switch:
D2(su)->show ssh status
SSH Server status: Disabled

set ssh

Use this command to enable, disable or reinitialize SSH server on the switch. By default, the SSH
server is disabled.
Syntax
set ssh {enable | disable | reinitialize}
Parameters
enable | disable
reinitialize
Defaults
None.
Mode
Switch command, read‐write.
Example
This example shows how to disable SSH:
D2(su)->set ssh disable

set ssh hostkey

Use this command to set or reinitialize new SSH authentication keys.
Syntax
set ssh hostkey [reinitialize]
Parameters
reinitialize
Enables or disables SSH, or reinitializes the SSH server.
Reinitializes the SSH server.
(Optional) Reinitializes the server host authentication keys.
set ssh
D-Series CLI Reference 15-69