Enterasys D2 D2G124-12P Cli Reference Manual page 303

D2(su)->show cos port-resource irl 1.0 1
Group Index Resource Type Unit
----------- -------- ---- ---- ----------
1.0 1
D2(su)->show cos
Group Index Resource Type Unit
----------- -------- ---- ---- ----------
2.0 1
3. In the CoS IRL reference mapping table for each port group, create a reference for each IRL
resource created in the previous step. We will use reference number 1.
D2(su)->set cos reference irl 1.0 1 rate-limit 1
D2(su)->set cos reference irl 2.0 1 rate-limit 1
D2(su)->show cos reference irl 1.0
Group Index Reference Type Rate Limiter
----------- --------- ---- ------------
1.0 0
1.0 1
1.0 2
1.0 3
...
1.0 97
1.0 98
1.0 99
D2(su)->show cos reference irl 2.0
Group Index Reference Type Rate Limiter
----------- --------- ---- ------------
2.0 0
2.0 1
2.0 2
2.0 3
...
2.0 97
2.0 98
2.0 99
4. In the CoS settings table, configure a CoS setting for CoS index 1, which has a priority of 0. We
enter the IRL reference, created in the previous step.
D2(su)->set cos settings 0 irl-reference 1
D2(su)->show cos settings
CoS Index Priority
--------- ---------- ------- -----
0 0
1 1
2 2
3 3
4 4
5 5
6 6
7 7
Rate
irl kbps 512
port-resource irl 2.0 1
Rate
irl kbps 10000
irl none
irl 1
irl none
irl none
irl none
irl none
irl none
irl none
irl 1
irl none
irl none
irl none
irl none
irl none
ToS IRL
* 1
* *
* *
* *
* *
* *
* *
* *
Configuring Policy Class of Service (CoS)
Rate Limit Type Action
--------------- ------
drop none
Rate Limit Type Action
--------------- ------
drop none
D-Series CLI Reference 9-17