Show Port Counters Output Details - Enterasys D2 D2G124-12P Cli Reference Manual

show port counters
Mode
Switch command, read‐only.
Examples
This example shows how to display all counter statistics, including MIB2 network traffic and
traffic through the device for
D2(su)->show port counters ge.3.1
Port: ge.3.1
No counter discontinuity time
-----------------------------------------------------------------
MIB2 Interface Counters
-----------------------
In Octets
In Unicast Pkts
In Multicast Pkts
In Broadcast Pkts
In Discards
In Errors
Out Octets
Out Unicasts Pkts
Out Multicast Pkts
Out Broadcast Pkts
Out Errors
802.1Q Switch Counters
----------------------
Frames Received
Frames Transmitted
This example shows how to display all
device.
D2(su)->show port counters ge.3.1 switch
Port: ge.3.1
802.1Q Switch Counters
-----------------------
Frames Received
Frames Transmitted
Table 4‐12 provides an explanation of the command output.
Table 4-12 show port counters Output Details
Output Field
Port
MIB2 Interface
Bridge Port
4-6 Port Configuration
ge
.3.1:
MIB2 Interface: 1
ge
Bridge Port: 2
0
0
What It Displays...
Port designation. For a detailed description of possible port-string values, refer to
"Port String Syntax Used in the
MIB2 interface designation.
IEEE 802.1D bridge port designation.
0
0
0
0
0
0
0
0
0
0
0
0
0
.3.1 port counter statistics related to traffic through the
CLI" on page 4-1.