Updating The Server Configuration - Lenovo TD200 - ThinkServer - 3809 Hardware Maintenance Manual

1
Power cord connector
2
Ethernet transmit/receive activity
LED
3
Ethernet link status LED
4
Ethernet transmit/receive activity
LED
5
Ethernet link status LED
6
Ethernet 2 10/100/1000
7
USB 4
8
USB 3
9
USB 2

Updating the server configuration

When you start the server for the first time after you add or remove an internal option or an external device,
you might receive a message that the configuration has changed. The Setup Utility starts automatically so
that you can save the new configuration settings. For additional information, see "Using the Setup Utility" on
page 294.
Some options have device drivers that you must install. For information about installing device drivers, see
the documentation that comes with each option.
If the server has a ™ServeRAID adapter and you have installed or removed a hard disk drive, see the
™ServeRAID documentation for information about reconfiguring the disk arrays.
254
ThinkServer TD200 Hardware Maintenance Manual
10
USB 1
11
Ethernet 1 10/100/1000
12
NMI button
13
Systems-management Ethernet connector
14
Video
15
Serial 1 (COM 1)
16
Fault (error) LED
17
ac power LED
18
dc power LED