Lenovo TD200 - ThinkServer - 3809 Hardware Maintenance Manual page 180

Hardware maintenance manual
Hide thumbs Also See for TD200 - ThinkServer - 3809:
Table of Contents

Advertisement

1
EMC shield
2
Tape drive
Step 5.
If the tape drive comes with screws, secure the tape drive to the chassis with the supplied screws.
Step 6.
Connect one of the connectors on the optical drive power cable to the tape drive.
Step 7.
Connect one end of the tape drive signal cable to the tape drive and the other end to the connector
on the system board. Route the cable through the plastic slots on the bottom of the chassis
underneath the fan cage assembly as shown in the following illustration:
172
ThinkServer TD200 Hardware Maintenance Manual

Advertisement

Table of Contents
loading

Table of Contents