Lenovo TD200 - ThinkServer - 3809 Hardware Maintenance Manual page 6

Installing the rear adapter retention bracket . . .
Removing the front adapter-retention bracket . .
Installing the front adapter-retention bracket . . .
Removing the battery . . . . . . . . . . . .
Installing the battery . . . . . . . . . . . .
Removing and installing drives . . . . . . . .
Removing a DVD drive . . . . . . . . . .
Installing a DVD drive . . . . . . . . . .
Removing an optional tape drive . . . . . .
Installing an optional tape drive . . . . . .
Removing a 2.5-inch hot-swap hard disk
drive . . . . . . . . . . . . . . . . .
Installing a 2.5-inch hot-swap hard disk
drive . . . . . . . . . . . . . . . . .
Removing a 3.5-inch hot-swap hard disk
drive . . . . . . . . . . . . . . . . .
Installing a 3.5-inch hot-swap hard disk
drive . . . . . . . . . . . . . . . . .
Removing a simple-swap hard disk drive . .
Installing a simple-swap hard disk drive . . .
IDs for hot-swap hard disk drives . . . . .
Power and signal cables for internal drives . .
Removing a power supply . . . . . . . . . .
Installing a power supply. . . . . . . . . . .
Removing the microprocessor and heat sink . . .
Installing a microprocessor and heat sink . . . .
Thermal grease . . . . . . . . . . . .
Removing the heat-sink retention module . . . .
Installing a heat-sink retention module . . . . .
Removing a microprocessor retention module . .
Installing a microprocessor retention module . . .
Removing a voltage regulator module (VRM) . . .
Installing a voltage regulator module (VRM) . . .
Removing the system board . . . . . . . . .
Installing the system board . . . . . . . . . .
Removing a hot-swap fan . . . . . . . . . .
Installing a hot-swap fan . . . . . . . . . . .
Removing a memory module . . . . . . . . .
Installing a memory module . . . . . . . . .
Removing an adapter . . . . . . . . . . . .
Installing an adapter . . . . . . . . . . . .
Installing a second microprocessor
Removing a ServeRAID-BR10i SAS/SATA
controller . . . . . . . . . . . . . . . . .
Installing the ServeRAID-BR10i SAS/SATA
controller . . . . . . . . . . . . . . . . .
Installing the optional ServeRAID-MR10i SAS/SATA
controller . . . . . . . . . . . . . . . . .
Installing the optional ServeRAID-MR10is VAULT
SAS/SATA controller . . . . . . . . . . . .
Removing the virtual media key . . . . . . . .
Installing the virtual media key . . . . . . . .
vi
ThinkServer TD200 Hardware Maintenance Manual
156
157
157
157
159
160
163
166
170
171
173
175
176
177
179
180
181
182
183
185
187
189
195
196
198
199
200
202
203
204
206
207
208
209
211
217
218
. . . . . . 221
226
227
231
237
244
245
Removing the control-panel assembly . . . . .
Installing the control-panel assembly . . . . . .
Completing the installation . . . . . . . . . .
Closing the bezel . . . . . . . . . . . .
Installing the air baffle . . . . . . . . . .
Installing the side cover . . . . . . . . .
Connecting the cables . . . . . . . . . .
Updating the server configuration . . . . .
Connecting external devices . . . . . . . . .
Chapter 8. Parts listing, TD200
Machine Types 3724, 3808, 3809,
3815, 3817, 3824, 3826, 3836 . . . .
Replaceable server components. . . . . . . .
Power cords and software . . . . . . . . . .
Chapter 9. Configuring the server .
Using the Setup Utility. . . . . . . . . . . .
Starting the Setup Utility . . . . . . . . .
Setup Utility menu choices . . . . . . . .
Passwords . . . . . . . . . . . . . .
Configuring RAID controllers . . . . . . . . .
Using the LSI Configuration Utility program . .
Using the WebBIOS utility . . . . . . . . . .
Starting the WebBIOS utility
Main menu of the WebBIOS utility . . . . .
Creating a storage configuration using the
Configuration Wizard . . . . . . . . . .
Viewing and changing properties. . . . . .
Viewing and changing virtual disk
properties . . . . . . . . . . . . . . .
Using the EasyStartup DVD. . . . . . . . . .
Before you use the EasyStartup DVD . . . .
Configuring RAID . . . . . . . . . . . .
EasyStartup overview . . . . . . . . . .
Installing your operating system without using
EasyStartup . . . . . . . . . . . . . .
Using the Boot Manager program . . . . . . .
Enabling the Broadcom Gigabit Ethernet Utility
program . . . . . . . . . . . . . . . . .
Configuring the Broadcom Gigabit Ethernet
controller . . . . . . . . . . . . . . . . .
Updating the firmware. . . . . . . . . . . .
Starting the backup server firmware . . . .
Recovering the server firmware . . . . . .
Automated boot recovery (ABR) . . . . . . . .
Three boot failure . . . . . . . . . . . . .
Using the integrated management module . . . .
Using the remote presence capability and
blue-screen capture . . . . . . . . . . . .
Enabling the remote presence feature . . . .
Obtaining the IP address for the IMM . . . .
246
248
249
249
251
252
253
254
255
257
258
285
293
294
294
294
297
297
298
300
. . . . . . . 300
300
301
301
302
302
302
303
303
305
305
305
306
306
307
307
309
309
309
310
311
311