Lenovo TD200 - ThinkServer - 3809 Hardware Maintenance Manual page 173

1
Fan cage assembly
2
Fan cage assembly release buttons
Step 8. Disconnect the power and signal cables from the drive that is to be removed.
Step 9. Press and hold the blue release tabs on each side of the DVD drive to release the drive; then, pull
the drive out of the front of the server.
Step 10. Remove the blue optical drive rails
when you install the replacement drive.
Step 11. If you are instructed to return the DVD drive, follow all packaging instructions, and use any
packaging materials for shipping that are supplied to you.
1
from the side of the drive and save the optical rails to use
Chapter 7
.
Installing and replacing FRUs
165