Lenovo TD200 - ThinkServer - 3809 Hardware Maintenance Manual page 60

• Follow the suggested actions in the order in which they are listed in the Action column until the problem is
solved.
• See Chapter 8 "Parts listing, TD200 Machine Types 3724, 3808, 3809, 3815, 3817, 3824, 3826, 3836" on page
257 to determine which components are customer replaceable units (CRU) and which components are
field replaceable units (FRU).
• If an action step is preceded by "(Trained service technician only)," that step must be performed only by
a trained service technician.
IMM clock has been set
from NTP server %1.(%1 =
Lenovo_NTPService.ElementName)
SSL data in the IMM configuration
data is invalid. Clearing configuration
data region and disabling SSL+H25.
Flash of %1 from %2
succeeded for user %3.(%1 =
CIM_ManagedElement.ElementName;
%2 = Web or LegacyCLI; %3
= user ID)
Flash of %1 from %2
failed for user %3.(%1 =
CIM_ManagedElement.ElementName;
%2 = Web or LegacyCLI; %3
= user ID)
The Chassis Event Log (CEL) on
system %1 is 75% full.(%1 =
CIM_ComputerSystem.ElementName)
The Chassis Event Log (CEL) on
system %1 is 100% full.(%1 =
CIM_ComputerSystem.ElementName)
52
ThinkServer TD200 Hardware Maintenance Manual
Info The IMM clock has been set
to the date and time that
is provided by the Network
Time Protocol server.
Error There is a problem with the
certificate that has been
imported into the IMM. The
imported certificate must
contain a public key that
corresponds to the key
pair that was previously
generated through the
Generate a New Key and
Certificate Signing Request
link.
Info A user has successfully
updated one of the following
firmware components:
• IMM main application
• IMM boot ROM
• Server (UEFI) firmware
• Diagnostics
• Integrated service
processor
Info An attempt to update a
firmware component from
the interface and IP address
has failed.
Info The IMM event log is 75%
full. When the log is full,
older log entries are replaced
by newer ones.
Info The IMM event log is full.
When the log is full, older
log entries are replaced by
newer ones.
No action; information only.
1. Make sure that the certificate
that you are importing is
correct.
2. Try to import the certificate
again.
No action; information only.
Try to update the firmware again.
To avoid losing older log entries,
save the log as a text file and clear
the log.
To avoid losing older log entries,
save the log as a text file and clear
the log.