Lenovo TD200 - ThinkServer - 3809 Hardware Maintenance Manual page 80

Table 4. DSA Preboot messages
• Follow the suggested actions in the order in which they are listed in the Action column until the problem is
solved.
• See Chapter 8 "Parts listing, TD200 Machine Types 3724, 3808, 3809, 3815, 3817, 3824, 3826, 3836" on page
257 to determine which components are customer replaceable units (CRU) and which components are
field replaceable units (FRU).
• If an action step is preceded by "(Trained service technician only)," that step must be performed only by
a Trained service technician.
• Go to the Lenovo support Web site at http://www.lenovo.com/support/ to check for technical information,
hints, tips, and new device drivers or to submit a request for information.
Message
number Component Test
089-801-xxx CPU
72
ThinkServer TD200 Hardware Maintenance Manual
State
CPU Stress Aborted
Test
Description Action
Internal program 1. Turn off and restart the system.
error.
2. Make sure that the system firmware
is at the latest level. The installed
firmware level is shown in the DSA
event log in the Firmware/VPD
section for this component. For
more information, see "Updating
the firmware" on page 306.
3. Run the test again.
4. Turn off and restart the system if
necessary to recover from a hung
state.
5. Run the test again.
6. Replace the following components
one at a time, in the order shown,
and run this test again to determine
whether the problem has been
solved:
a. (Trained service technician only)
b. (Trained service technician only)
7. If the failure remains, go to
the Lenovo Web site for more
troubleshooting information at
http://www.lenovo.com/support.
Microprocessor board
Microprocessor