Lenovo TD200 - ThinkServer - 3809 Hardware Maintenance Manual page 258

1
Bezel
2
Hinge assembly
3
Retention tabs
2. Push the hinges into the holes on the chassis until they snap into place.
3. If however, the bezel was removed by detaching the sliding hinge mount from the hinge assembly (using
the breakaway method as the bezel was designed to do), complete the following steps to reattach
the bezel:
a. Press in on the rear of the sliding hinge mount until it extends beyond the edge of the bezel and
hold it in place.
250
ThinkServer TD200 Hardware Maintenance Manual