Lenovo TD200 - ThinkServer - 3809 Hardware Maintenance Manual page 156

Attention: Do not allow the server to fall over.
4. Lay the server on its side.
5. Unlock the side cover.
6. Remove the cover (see "Removing the side cover" on page 146).
7. Rotate the power-supply cage assembly out of the chassis. Lift up the power-supply cage handle and
pull the power-supply cage assembly all the way up until the retainer latch locks the cage in place
on the chassis.
1
Power supply
2
Power-supply handle
8. Remove the air baffle assembly. Press the blue tab (on top of the fan cage) on the air baffle assembly to
the left and lift it from the server and set it aside.
Note: It might be easier to remove the air baffle if you lift up the plastic tab that is over the DIMMs in
the rear of the server.
148
ThinkServer TD200 Hardware Maintenance Manual