Lenovo TD200 - ThinkServer - 3809 Hardware Maintenance Manual page 228

7. Carefully grasp the adapter by the top edge or upper corner, and move the adapter directly from the
static-protective package to the adapter slot. Align the adapter with the expansion slot guides; then,
press the adapter firmly into the expansion slot. For a full-length adapter, make sure that the front edge of
the adapter is properly seated in the correct slot in the front adapter-retention bracket.
Note: Make sure that the adapter is seated correctly in the expansion slot before you turn on the server.
Incomplete installation of an adapter might damage the system board or the adapter.
1
Adapter
2
Rear adapter retention bracket
3
Front adapter retention bracket
8. Connect all required cables to the adapter. Route cables so that they do not block air flow from the fans..
220
ThinkServer TD200 Hardware Maintenance Manual