Canon G3 Error Code List page 88

Chapter 2: Service Error Codes
##210 [ TX ] CD (control document) communication is
Cause
• The other party cannot use CD communi-
cation in Canon mode.
• The other party does not support CD com-
bination in Canon mode.
##220 [ TX/RX ] System error (e.g., main program may
Cause
• Noise caused the CPU to malfunction.
• A fault occurred in the software.
• A fault occurred in the hardware.
• A hard disk error occurred.
not possible
Remedy
• The other party cannot use the CD com-
munications function (i.e., Canon mode
relay and confidential for G4); try a differ-
ent method of communication.
have gone away)
Remedy
• Turn off and then on the power.
• Correct it by referring to the Service
Manual.
2-28