Canon G3 Error Code List page 61

##001 [ TX ] In telephone fax mode transmission, the
Cause
• The line condition is poor, and the other
party cannot receive the phase signal cor-
rectly.
##002 [ RX ] In G2 reception, the image storage
Cause
• The buffer memory is faulty.
phase OK signal cannot be received
Remedy
• Increase the transmission level
other party may receive the phase signal
correctly.
• Adjust the NL equalizer
party may receive the phase signal cor-
rectly.
memory goes out of order
Remedy
• Replace the system control board.
2-1
Chapter 2: Service Error Codes
*1
so that the
*2
so that the other