Canon G3 Error Code List page 228

Chapter 2: Service Error Codes
##1102 [ TX/RX ] Recovery on time expiry
Cause
• Cause number #102 (Recovery on time
expiry) arrived from the network. An ab-
sence of signals occurred temporarily for
the protocol of channel D because of the
following, activating the signal wait timer:
the other party did not respond, the ex-
change suffered a fault, the terminal of the
other party was out of order, or noise oc-
curred.
##1103 [ TX/RX ] Message received with an incorrect length
Cause
• Cause number #103 (Message received
with an incorrect length for mandatory in-
formation element) arrived from the net-
work.
Remedy
• Start a communication once again.
• Print out a communications analysis list,
and analyze it.
• Contact the telephone company or the ex-
change manufacturer to find out the nature
of cause number #102.
for mandatory information element
Remedy
• Start a communication once again.
• Print out a communications analysis list,
and analyze it.
• Contact the telephone company or the ex-
change manufacturer to find out the nature
of cause number #103.
2-168
[French model]