Canon G3 Error Code List page 196

Chapter 2: Service Error Codes
##1001 [ TX/RX ] Unallocated (Unassigned) number
[ TX/RX ] Invalid call reference value [German model]
Cause
• Cause number #1 (Unallocated (Unas-
signed) number) arrived from the network.
Assigned number was not existed.
• Cause number #1 (Invalid call reference
value) arrived from the network.
##1002 [ TX/RX ] No route to specified transit network
• Cause number #2 (No route to specified
transit network) arrived from the network.
Remedy
• Check the telephone number, and call
again.
• Print out a communications analysis list,
and analyze it.
• Contact the telephone company or the ex-
change manufacturer to find out the nature
of cause number #1.
• Start a communication once again.
• Print out a communications analysis list,
and analyze it.
• Contact the telephone company or the ex-
change manufacturer to find out the nature
of cause number #1.
Remedy
• Check the method of connection to the
specified transit network once again.
• Print out a communications analysis list,
and analyze it.
• Contact the telephone company or the ex-
change manufacturer to find out the nature
of cause number #2.
2-136