Canon G3 Error Code List page 191

##800 [ TX ] Multifile transmission error
Cause
• While in relay operation in response to a
relay control request, a multifile transmis-
sion error occurred.
##801 [ TX/RX ] The allowed number of signal
Cause
• There is no response to a signal sent to the
hard disk.
Remedy
• Transmit to the other party using a normal
means of transmission to find out the cause.
• Record the protocol on a DAT or MD, and
have it analyzed by the local Canon office
and/or Technical Center.
re-transmissions (3 times) to the hard disk
was exceeded
Remedy
• Check the connection of the connectors as-
sociated with the hard disk.
• Replace the hard disk.
2-131
Chapter 2: Service Error Codes