Canon G3 Error Code List page 81

##117 [ RX ] During reception, DCN was received after
Cause
• The line condition is poor, and the other
party cannot receive DIS correctly.
• The Stop button of the other party was
pressed.
##118 [ RX ] During reception, T1 time-over occurred
Cause
• The line condition is poor, and the other
party cannot receive DIS correctly.
• The line condition is poor, and DCS from
the other party cannot be received correctly.
transmission of DIS between pages
Remedy
• Increase the transmission level
other party can receive the signal correctly.
• Adjust the NL equalizer
party may receive the signal correctly.
• Ask the operator of the other party to trans-
mit once again.
between pages
Remedy
• Increase the transmission level
other party may receive the signal correctly.
• Adjust the NL equalizer
party may receive the signal correctly.
• Ask the operator of the other party to in-
crease the transmission level
signal may be received correctly.
• Adjust the NL equalizer
nal may be received correctly.
2-21
Chapter 2: Service Error Codes
*1
so that the
*2
so that the other
*1
so that the
*2
so that the other
*1 so that the
*2
so that the sig-