Canon G3 Error Code List page 292

Bit No.
21, 22, Minimum scan line time capability at the receiver:
23 (000)=20ms at fine, 20ms at standard
(001)=40ms at fine, 40ms at standard
(010)=10ms at fine, 10ms at standard
(100)=5ms at fine, 5ms at standard
(011)=10ms at fine, 5ms at standard
(110)=20ms at fine, 10ms at standard
(101)=40ms at fine, 20ms at standard
(111)=0ms at fine, 0ms at standard
24 Extend field:
(0)=FIF is up to this bit, (1)=FIF is extended by 8bits after this bit
25 Reserved
26 Uncompressed mode:
(0)=Not provided, (1)=Provided, (0) on Canon machines
27 Error correction mode (ECM): (0)=Not provided, (1)=Provided
28 Set to "0"
29 Reserved
30 Reserved
31 T.6 coding capability: (0)=Not provided, (1)=Provided
32 Extend field:
(0)=FIF is up to this bit, (1)=FIF is extended by 8bits after this bit
33 Field not valid capability: (0)=Not provided, (1)=Provided
34 Multiple selective polling capability: (0)=Not provided, (1)=Provided
35 Polled subaddress: (0)=Not provided, (1)=Provided
36 T.43 coding: (0)=Not provided, (1)=Provided
37 Plane interleave: (0)=Not provided, (1)=Provided
38 Voice coding with 32 kbps ADPCM (Rec.G.726):
(0)=Not provided, (1)=Provided
39 Reserved for the use of extended voice coding
40 Extend field:
(0)=FIF is up to this bit, (1)=FIF is extended by 8bits after this bit
41 R8x15.4lines/mm: (0)=Not provided, (1)=Provided
42 300x300pels/25.4mm: (0)=Not provided, (1)=Provided
43 R16x15.4lines/mm and/or 400x400pels/25.4mm:
(0)=Not provided, (1)=Provided
44 Inch-based resolution preferred
45 Metric-based resolution preferred
Meaning/Function
A-15
Appendix