Canon G3 Error Code List page 76

Chapter 2: Service Error Codes
##107 [ RX ] The transmitting machine cannot use fall-
Cause
• The line condition is poor, and the signal
from the other party cannot be received
correctly even at 2400 bps.
• The machine malfunctioned because of an
echo.
##108 [ TX ] Reversal of the polarity has been detected in
Cause
• An attempt was made to send 32 or more
documents at a time.
• The length of a single document is longer
than 2 A4 sheets (594 mm).
• The other party released the line while in
reception.
• STOC has detected a fault.
• An account charge pulse occurred.
back
Remedy
• Ask the operator of the other party to in-
crease the transmission level
signal may be received correctly.
• Adjust the NL equalizer
nal may be received correctly.
• Loosen the RTN transmission conditions
so that RTN will not be transmitted.
• Provide echo remedy 2
• Decrease the transmission level
an echo of the transmitted signal will not
be received.
relation to F-NET2 (Facsimile
communication network services 2)
Remedy
• Divide the documents so that a single trans-
mission will consist of 31 or fewer.
• Divide the document so that each signal is
shorter than 2 A4 sheets.
• Transmit once again.
• File a problem report with NTT.
2-16
*1
so that the
*2
so that the sig-
*7
.
*1
so that
[Japanese model]
*6